Pair and connect the headset
Before using the headset, you must
pair and connect it to a compatible
device.
If your mobile device supports the
A2DP Bluetooth profile and has a
music player feature, you can use the
device to also play music through the
headset.
If your mobile device does not support
the A2DP profile, you can separately
pair the headset with the mobile
device and a music player that
supports this profile. If you have
paired and connected the headset to
your mobile device, disconnect the
headset from it before pairing the
headset with the music player.
To pair and connect the headset to
your device if the device supports the
Near Field Communication (NFC)
feature, activate the feature, and use
your device to touch the area shown
in figure 10 at the start of this guide.
For details on NFC, see the user guide
of your device.
To pair and connect the headset to
your device if the device does not
support NFC:
1. Ensure that your mobile device or
music player is switched on and
the headset is off.
2. If the headset has not been
previously paired with a device,
switch on the headset. The headset
enters pairing mode, and the blue
indicator light starts to flash
quickly.
If the headset has been previously
paired with a device, ensure that
the headset is switched off, and
press and hold the power key (for
about 8 seconds) until the blue
indicator light starts to flash
quickly.
ENGLISH
3. Within about 3 minutes, activate
the Bluetooth feature on your
device, and set it to search for
Bluetooth devices. For details, see
the user guide of your device.
4. Select the headset from the list of
found devices.
5. If necessary, enter the passcode
0000 to pair and connect the
headset to your device. If your
device does not have a keypad, it
may use this passcode by default.
In some devices, you may need to
make the connection separately
after pairing.
When the headset is connected to
your device and is ready for use, the
blue indicator light flashes slowly.
You can pair the headset with up to
eight devices but connect it to only
one device supporting the HFP profile
and another device supporting the
A2DP profile at a time.
To manually connect the headset to a
last used device that supports the HFP
profile (for example, after connection
loss), switch the headset off and on, or
press and hold the answer/end key for
about 2 seconds. To manually connect
the headset to a last used device that
supports the A2DP profile, press the
play/pause key.
You may be able to set your device so
that the headset connects to it
automatically. To activate this feature
in a Nokia device, change the paired
device settings in the Bluetooth menu.
ENGLISH